View G154I1-L01_4597519.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

issu ed date: nov . 24, 20 08 model no.: g154i1 - l01 appr oval 1 / 26 the inform ation de scri b ed in thi s te chnical spe c ification i s p r eli m inary a nd it is po ssible t o be chan ged without p r io r notice. plea se cont act cm o ? s re pre s e n t ative while y our p r od uct d e sig n is ba se d on this spe c ificatio n. v e rsion 2.0 tft lcd approval s p ecification model no.: g154i1 - l01 o?y u@ ?f?? |a ?2? 2008-12-16 20:50:47 cst pmm d director cs_lee( ???t /17564/44926) director accept c u s t o m e r : approved by: note: for more informa tion: az displa ys, inc. 75 columbia, aliso viejo, ca 92656 http://www .azdispla ys.com
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 2 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 6 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 7 3.1 tft lcd module 3.2 backlight unit 4. block diagram ------------------------------------------------------- 11 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ------------------------------------------------------- 12 5.1 tft lcd module 5.2 scanning direction 5.3 backlight unit 5.4 timing diagram of lvds input signal 5.5 color data input assignment 6. interface timing ------------------------------------------------------- 15 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 17 7.1 test conditions 7.2 optical specifications 8. precautions ------------------------------------------------------- 21 8.1 assembly handling precautions 8.2 safety precautions 9. packing ------------------------------------------------------- 22 9.1 carton 9.2 pallet 10. definition of labels ------------------------------------------------------- 24 10.1 cmo module label 10.2 cmo carton labe
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 3 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 revision history version date section description ver 2.0 nov.24, 2008 all G154I1-L01 approval spec was first issued.
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 4 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 1. general description 1.1 overview g154i1 - l01 is a 15.4? tft liquid crystal display module and 20 pins lvds interface. this module supports 1280 x 800 wxga mode and can display 262,144 colors. the inverter module for backlight is not built in. 1.2 features - wxga (1280 x 800 pixels) resolution - de only mode - fast response time - wide operation temperature - lamp replaceable - sunlight readable - reverse scan 1.3 application -tft lcd monitor - industrial application - amusement - vehicle 1.4 general specificati0ns item specification unit note active area 331.2 x 207.0 mm bezel opening area 334.5 x 210.3 mm (1) driver element a-si tft active matrix - - pixel number 1280xr.g.bx800 pixel - pixel pitch 0.259(h) x 0.259(v) mm - pixel arrangement rgb vertical stripe - - display colors 262,144 color - transmissive mode normally white - - surface treatment glare,3h, lr - -
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 5 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 351.5 352 352.5 mm vertical(v) 229.5 230 230.5 mm module size depth(d) 15.5 15.8 16.3 mm (1) weight 1290 1350 g - i/f connector mounting position the mounting in clination of the connector makes the screen center within 0.5mm as the horizontal. (2) note (1) please refer to the attached drawings for more information of front and back outline dimensions. note (2) connector mounting position +/- 0.5mm
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 6 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 2. absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note operating ambient temperature t op -30 +80 oc (1) storage temperature t st -40 +85 oc (1) test item test condition note high temperature storage test 85oc, 240hours low temperature storage test -40oc, 240hours thermal shock storage test -30oc, 0.5hour~85oc, 0.5hour, 100 cycles high temperature operati on test 80oc, 240hours low temperature operation test -30oc, 240hours high temperature & high humidity operation test 60oc 90%rh, 240hours (1) (3) esd test (operation) 8kv (1) shock (non-operating) 50g/11ms (1)(2) vibration (non-operating) 1.5g (1)(2) note (1) no display malfunctions. note (2) at testing vibration and shock, the fixtur e in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. note (3) temperature of panel display surface area should be 85 oc max. note (4) in the standard conditions, there is no function failure issue occurred. all t he cosmetic specification is judged before the reliability test 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage v cc -0.3 +4.0 v logic input voltage v in -0.3 v cc +0.3 v (1) 2.2.2 backlight unit value item symbol min. max. unit note lamp voltage v l 2.5 v rms (1), (2), i l = 7.0 ma lamp current i l 7.5 ma rms lamp frequency f l 40 80 khz (1), (2) note (1) permanent damage to the device may occur if maximum values are exceeded. function operation should be restricted to the conditions desc ribed under normal operating conditions. note (2) specified values are for lamp (refer to 3.2 for further information).
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 7 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 3. electrical characteristics 3.1 tft lcd module value parameter symbol min. typ. max. unit note power supply voltage vcc 3.0 3.3 3.6 v - permissive ripple voltage v rp 50 mv - rush current i rush 1.5 a (2) initial stage current i is 1.0 a (2) white 330 360 ma (3)a power supply current black icc 410 460 ma (3)b lvds differential input high threshold v th(lvds) +100 mv (4), v cm =1.2v lvds differential input low threshold v tl(lvds) -100 mv (4) v cm =1.2v lvds common mode voltage v cm 1.125 1.375 v (4) lvds differential input voltage |v id | 100 600 mv (4) terminating resistor r t 100 ohm note (1) the ambient temperature is ta = 25 2 oc. note (2) i rush : the maximum current when vcc is rising i is : the maximum current of the first 100ms after power-on measurement conditions: shown as the following figure. test pattern: black . vcc rising time is 470us r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +3.3v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) 470us +3.3v 0v 0.9vcc 0.1vcc vcc i is icc i rush 100ms
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 8 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 note (3) the specified power supply current is under the conditions at vcc = 3.3 v, ta = 25 2 oc, f v = 60 hz, whereas a power dissipation check pattern below is displayed. note (4) the parameters of lvds signals are defined as the following figures. active area a. white pattern active area b. black pattern 0v v cm | v id | single ended 0v | v id | v th ( lvds ) v tl ( lvds ) differential
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 9 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note lamp input voltage v l 540 600 660 v rms i l = 7.0 ma lamp current i l 3.0 7.0 8.0 ma rms (1) -- -- 1240(25 o c ) v rms (2) lamp turn on voltage v s -- -- 1450( 0 o c) v rms (2) operating frequency f l 40 55 80 khz (3) lamp life time l bl 50000 -- -- hrs (5) i l = 7.0ma power consumption p l -- 16.8 -- w (4), i l = 7.0 ma note (1) lamp current is measur ed by utilizing a high frequency current meter as shown below: note (2) the voltage that must be larger than vs should be applied to the lamp for more than 1 second after startup. otherwise, the lamp may not be turned on normally. note (3) the lamp frequency may produce interferen ce with horizontal synchronous frequency from the display, and this may cause line flow on the display. in order to avoid interference, the lamp frequency should be detached from the horizontal sy nchronous frequency and its harmonics as far as possible. note (4) p l = i l x v l x 4cclfs note (5) the lifetime of lamp can be defined as the time in which it continues to operate under the condition ta = 25 ? 2 o c and i l = 7.0 marms until one of t he following events occurs: (a) when the brightness becomes or lower than 50% of its original value. (b) when the effective ignition length becomes ?? 80% of its original value. (the effective ignition length is a scope that luminance is over 70% of that at the center point.) note (6) the waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter s hould be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. when designing or ordering the inverter please make sure that a poor lighting ca used by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occu rs. if the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. the output of the inverter must have symmetrical (negative and positive) voltage waveform and lcd module inverter 1 a hv (pink) 2 lv (white) current meter yokogawa 2016 a 1 a hv (blue) 2 lv (black)
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 10 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 symmetrical current waveform.(unsy mmetrical ratio is less than 10%) please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the asymmetry rate of the inverter waveform should be 10% below. b. the distortion rate of the waveform should be within ?? 2 10%. c. the ideal sine wave form shall be symmetric in positive and negative polarities. i p i -p * asymmetry rate: | i p ? i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / i rms
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 11 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 4. block diagram 4.1 tft lcd module 4.2 backlight unit note :on the same side, the same polarity lamp voltage design for lamps is recommended. 1 hv(blue) 2 lv(black) 1 hv(pink) 2 lv(white) 1 hv(blue) 2 lv(black) 1 hv(pink) 2 lv(white) reverse v l gnd vcc data & clock lvds display tft lcd panel (1280xr.g.b.x800) data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage generator input connector (fi-se20p-hfe (jae)) lamp connector (yeonho 35001hs-02l)
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 12 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 5. input terminal pin assignment 5.1 tft lcd module pin symbol description polarity remark 1 vccs power supply +3.3 v (typical) 2 vccs power supply +3.3 v (typical) 3 gnd ground 4 gnd ground 5 rx0- lvds differential data input negative r0~r5,g0 6 rx0+ lvds differential data input positive 7 gnd ground g1~g5, b0, b1 8 rx1- lvds differential data input negative 9 rx1+ lvds differential data input positive 10 gnd ground b2~b5, de, hsync, vsync 11 rx2- lvds differential data input negative 12 rx2+ lvds differential data input positive 13 gnd ground 14 clk- lvds clock data input negative lvds level clock 15 clk+ lvds clock data input positive 16 gnd ground 17 nc non-connection 18 nc non-connection 19 reverse +3.3vreverse, gnd/nc no reverse refer to 6.2 power on/off sequence note(5) 20 nc non-connection note (1) connector part no.: fi-se20p-hfe(jae) or equivalent note (2) user?s connector part no: fi-se20me (jae) or equivalent note (3) the first pixel is odd as shown in the following figure.
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 13 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 5.2 scanning direction the following figures are seen from a front view and the arrow shows the direction of scan. reverse = gnd/nc : normal display (default) reverse = high : display with 180 degree rotation 5.3 backlight unit pin symbol description color 1 hv high voltage pink 2 lv ground white note (1) connector part no.: yeonho 35001hs-02l or equivalent note (2) user?s connector part no.: yeonho 35001 wr-02l or equivalent 5.4 timing diagram of lvds input signal in6 in5 in4 in3 in2 in1 in0 in13 in12 in11 in10 in9 in8 in7 in20 in19 in18 in17 in16 in15 in14 g0 r3 r2 r1 r0 r5 r4 b1 g4 g3 g2 g1 b0 g5 de b5 b4 b3 b2 vsync hsync t/7 signal for 1 dclk cycle (t) rxin0 rxin1 rxin2 clk+
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 14 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 5.5 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 6-bit gray scale data input for the color. the higher the binary input, the brighter t he color. the table below provides the assignment of color versus data input. data signal red green blue color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0)/dark red(1) red(2) : : red(61) red(62) red(63) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0)/dark green(1) green(2) : : green(61) green(62) green(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0)/dark blue(1) blue(2) : : blue(61) blue(62) blue(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 15 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 6. interface timing 6.1 input signal timing specifications the specifications of input signal timing are as the following table and timing diagram . signal item symbol min. typ. max. unit note dclk frequency 1/tc 63.9 71 74.5 mhz - vertical total time tv 802 823 1030 th - vertical active display period tvd 800 800 800 th - vertical active blanking period tvb tv-tvd 23 tv-tvd th horizontal total time th 1360 1440 1600 tc - horizontal active display period thd 1280 1280 1280 tc - de horizontal active blanking period thb th-thd 160 th-thd tc note (1) because this module is operated by de only mode, hsync and vsync are ignored. input signal timing diagram t h t c dclk t hd t vd t v de de data
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 16 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 6.2 power on/off sequence timing specifications: 0.5 ?? t1 ?? 10 ms 0 ?? t2 ?? 50 ms 0 ?? t3 ?? 50 ms t4 ? 500 ms t5 ? 200 ms t6 ? 200 ms note (1) please follow the power on/off sequence de scribed above. otherwise, the lcd module might be damaged. note (2) please avoid floating state of interface signal at invalid period. when the interface signal is invalid, be sure to pull down the power supply of lcd vcc to 0 v. note (3) the backlight inverter power must be turned on after the power supply for the logic and the interface signal is valid. the backlight inverter power must be turned off before the power supply for the logic and the interface signal is invalid. note (4) sometimes some slight noise shows when lcd is turned off (even backlight is already off). to avoid this phenomenon, we suggest that the vcc falling time is better to follow (5) ?? t7 ?? (300) ms. note (5) reverse pin not change signal when panel normal displaying. - power supply for lcd, vcc - lvds interface - power for lamp - reverse (enable pin) 0v 0v 0v restart power on power off 10% t4 t1 90% 10% 90% 50% 50% t6 t5 valid data on off off t7 10% t3 t2
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 17 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 7. optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 3.3 v input signal according to typical val ue in "3. electrical characteristics" inverter current i l 7.0 ma inverter driving frequency f l 61 khz inverter darfon vk13165.101 the relative measurement methods of optical c haracteristics are shown in 7.2. the following items should be measured under the test conditions descri bed in 7.1 and stable environment shown in note (6). 7.2 optical specifications item symbol condition min. typ. max. unit note contrast ratio cr 500 700 - (2), (5) t r 5 10 ms response time t f 11 16 ms (3) center luminance of white l cen 600 700 cd/m 2 (4), (5) white variation w 1.25 1.4 - (5), (6) rx 0.622 - red ry 0.329 - gx 0.303 - green gy 0.577 - bx 0.146 - blue by 0.095 - wx 0.313 - color chromaticity white wy x =0 , y =0 viewing normal angle typ- 0.03 0.329 typ+ 0.03 - x + 70 80 horizontal x - 70 80 y + 70 80 viewing angle vertical y - cr 10 70 80 deg. (1) contrast ratio in daylight cr sun lamp 100 120 (7)
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 18 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l63 / l0 l63: luminance of gray level 63 l 0: luminance of gray level 0 cr = cr (5) cr (x) is corresponding to the contrast ratio of the point x at figure in note (6). note (3) definition of response time (t r , t f ) and measurement method: 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o 100% 90% 10% 0% gray l evel 63 gray l evel 0 gray l evel 63 time t f optical response t r 66 . 6 7 m s 66.67 ms
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 19 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 note (4) definition of average luminance of white (l cen ): measure the luminance of gray level 63 at 5 points l cen = l (5) l (x) is corresponding to the luminance of the point x at figure in note (6). note (5) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. usb2000 cs-1000t field of view = 2o 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 lux)
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 20 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 note (6) definition of white variation ( w): measure the luminance of gray level 63 at 5 points w = maximum [l (1), l (2), l (3), l (4), l (5)] / minimum [l (1), l (2), l (3), l (4), l (5)] note (7) contrast ratio in daylight: measuring method: sun lamp:10000 lux contrast ratio in daylight=luminance of white screen/ luminance of black screen d w active area vertical line horizontal line : test point x=1 to 5 5 1 2 3 4 d/4 d/2 3d/4 w/4 w/2 3w/4 x
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 21 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 8. precautions 8.1 assembly and handling precautions (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assemble or install module into user?s system can be only in clean working areas. the dust and oil may cause electrical short or worsen the polarizer. (3) it?s not permitted to have pressure or impulse on the module because the lcd panel and backlight will be damaged. (4) always follow the correct power sequence when lcd module is connecting and operating. this can prevent damage to the cmos lsi chips during latch-up. (5) do not pull the i/f connector in or out while the module is operating. (6) do not disassemble the module. (7) use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) it is dangerous that moisture come into or c ontacted the lcd module, because moisture may damage lcd module when it is operating. (9) high temperature or humidity may reduce the per formance of module. please store lcd module within the specified storage conditions. (10) when ambient temperature is lower than 10oc may reduce the display quality. for example, the response time will become slow ly, and the starting voltage of ccfl will be higher than room temperature. (11) do not keep same pattern in a long period of time. it may cause image sticking on lcd 8.2 safety precautions (1) the startup voltage of backlight is approximat ely 1000 volts. it may cause electrical shock while assembling with inverter. do not disassemble the mo dule or insert anything into the backlight unit. (2) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) after the module?s end of life, it is not harmful in case of normal operation and storage.
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 22 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 9. packaging 9.1 carton figure. 8-1 packing method
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 23 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 9.2 pallet figure. 9-2 packing method figure. 9-3 packing method
issued date: nov.24, 2008 model no.: g154i1 - l01 approval 24 / 26 the information described in this technical specification is preliminary and it is possible to be changed without prior notice. please contact cmo ?s representative while y our product design is based on this specification. version 2.0 10. definition of labels 10.1 cmo module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. (a) model name: g154i1 - l01 (b) revision: rev. xx, for example: a1, ?c1, c2 ?etc. (c) serial id: x x x x x x x y m d x n n n n serial id includes the information as below: (a) manufactured date: year: 1~9, for 2001~2009 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i , o and u (b) revision code: cover all the change (c) serial no.: manufacturing sequence of product 10.2 cmo carton label year, month, date cmo internal use revision serial no. cmo internal use cmo internal use chi mei optoelectronics made in taiwan e207943 x x x x x x x y m d l n n n n g154i1 -l01 rev.xx rohs

▲Up To Search▲

Price & Availability of G154I1-L01

	To Download G154I1-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .